SUNLU 3D Printer Filament PLA Plus 1.75mm SUNLU Neatly Wound 1.75mm PRO PLA+ Filament for Most FDM 3D Printer Dimensional Accuracy +/- 0.02 mm 1 kg Spool(2.2lbs) Beige

FAQ: ● Why can't the filaments stick to the build bed easily? ● Please do 3 steps checking！ ① Temperature Please check the temperature(bed and nozzle) settings before printing and set it suitable. ② Building Bed Please check if the bed is level make sure the nozzle doesn't too far or too close to the bed. ③ Speed Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s). Recommended Settings: ● Nozzle 210°C - 235°C (410°F - 455°F) ● Bed 70°C - 80°C (158°F - 176°F) ● Printing Speed: 40-80(mm/s) ● These settings are for 0.4mm nozzle it may be different with different diameters nozzle Notes ● Please insert the filament into the side holes after use to avoid tangles. ● Feel free to message us if you have any questions about the filament. ● Please stored the 3D printer fila